T100 is a type of solvent-base impregnator, especially formulated for high absorptive natural stone. Its special molecular elements penetrate into the surface of natural stone protecting them from seepage’s and from prejudicial action of external agent and extraneous substance. It develops a high protective, water-proofing and antistain action. It also highly resists against pentration of oils, smog, moulds, coffee, dirt etc.

Materials:

Suitable for all types of porous materias.

Usage:

1.      The surface to be treated must be dry, without dust and free from any kind of greasy substances. Apply T100 by roller, sprayer and brush.

2.      Depending on the environment conditions ( temperature, air humidity ) the solvent evaporates in 10-15minutes. If the absorption is compieted, the excess should be removed by another clean, dry and not dyed cotton rag, some hard and dried residue may remain on the surface (always on the polished surface ) which can easily be removed by using a small quantity of T100.

3.      For best protecting action, further application, after one hour from the previous one, are suggested. Depending on the porosity of the materials applied, the coverage is about 8-10sq.㎡/Litre. Complete protection is effective after 24 hours.

Notes:

1.      Contain ethyi acetae, mineral turpentine, harmful for ingestion and long inhalation.

2.      Inflammable, keep far from flames and sparks, do not smoke. Keep out of the reach of children.

3.      Use in a well-ventilated place and wear gloves where necessary.

4.      Keep the container well closed and store it in a cool place.

5.      A preliminary test on a small part of the surface is suggested.